Pier and Surf Forum banner

Question about guide setup on a CCP 13' 3-6 oz blank

3709 Views 3 Replies 3 Participants Last post by  Sandcrab
I plan on building on a CCP 13' 3-6oz blank and have a couple questions for the rod builders here.

I will be pairing this with an AVET SX and was wondering if anyone has a preferred guide train and layout setup?

I was planning on using the following sizes

20-16-12-and 10's to the tip. I will be using 20lb braid for the running line and 50lb braid for a shock leader if needed.

Is there a general guide distance from the reel to the first guide that works best?

Is there any info on the handle length and guide placement on the factory rods that i can use as a baseline to build off'?

Thanks for any info you can provide :beer:
1 - 2 of 4 Posts
Perfect this will get me headed in the right direction.

Thanks for the quick response. :fishing:
1 - 2 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.